README for EtwoTouch USB, AcousticWave Touchscreen driver package.

 Version 6.9.0 for Windows XP 

Thank you for choosing ETWOTOUCH USB, AcousticWave Touchscreen products. This README file contains additional notes about our touchscreen software which,we think,will help you make better use of the touchscreen and touchscreen software.

 


CONTENTS

1.Install/Uninstall Manual

2.Software package component

3.Problem solution


1. Install/Uninstall Manual

NOTES:  It must have administrators access rights to install the touchscreen software package . It must also have administrators access rights to run the touchscreen control panel and touchscreen calibration applications.

  1. Please run the Setup.exe in the driver pakage, the program will install USB Acousticwave touchscreen  driver in your computer.
  2. Change Touchscreen setup, click the "Start" menu, point to "programs" , and then point to "ETWO TOUCH USB",  click "ettcplusb". Or you can click the "Start" menu, point to "control panel" to open control panel window,double-click the "Etwotouch Setup" icon, now you can change touchscreen settings on the property window. It's a notice that in  Windows XP system,the control panel window should change into classical-view, or else the "Etwotouch Setup" icon will hide when the control window in group-view by default.
  3. Uninstall Touchscreen software ,click the "Start" menu, point to "Programs", and then "ETWO TOUCH USB", Select "Uninstall" from the list of application. 
  4. After installed the driver, you can arbitrarily shift touchscreen USB interface. If you haven't calibrated touchscreen, please calibrate and then touchscreen will work normally.
  5. Open touchscreen control panel and click "About ETWOTOUCH" , you will see release version.

2. Software Component

The touchscreen software package is composed of the following programs:

1.ettusb.sys , ettfilt.sys

Touchscreen driver files for USB

2.ettusb.inf , ettfilt.inf

Touchscreen driver setup and configrate files

3.ettcplusb.cpl 

Touchscreen control panel

4.uninst.exe 

Touchscreen uninstall utility

5.ettcal.exe

Touchscreen calibration applications

6.setup.exe

Touchscreen software package installation program with it,all hardware installation and software configuration is quite easy

7.readme.htm  

This file you read now

3. Problem solution

  1. The system mouse class driver MOUCLASS.SYS and HIDUSB.SYS are required by the driver. Most times, it is installed during Windows installation process.if not,the device driver will not work.
  2. When you have calibrated touchscreen, but mouse cursor don't appear normally on desktop,  please open "Etwotouch Setup" and change "mouse mode" to "Dragging", then calibrate touchscreen again.


 Copyright (C) 2003-2010, EtwoTouch Co. Ltd. All rights reserved